Showroom:
8 Parkinson Lane, Kardinya, Western Australia 6163
Ph: +61 (08) 9331 3966 | Fax: +61 (08) 9314 1926 |
hecsfire at bigpond dot com (Email Us)



[+] click on image to enlarge
Dry Chemical Powder type fire extinguishers are characterised by their high performance, simple method of operation and rapid fire knock down capability. They are suitable for all paper, textiles, wood, plastics, rubber, petrol, oil, paints, gas and electrical equipment. The most common type used is the (ABE) fire extinguisher. The location and usage of this fire extinguisher is important, when discharged the fine powder may cause specific concerns or damage.
Choice of capacity 1.0kg, 1.5kg, 2.0kg, 2.5kg, 4.5kg, 6.0kg & 9.0kg
CO2 type fire extinguishers are characterised by their high performance for Class E fires involving an electrical risk like computers, office equipment and generators. CO2 is non-conductive, clean and safe with minimal damage to electrical equipment. The effect of a CO2 extinguisher can be limited where there is air movement and discharge within a confined space is definitely not recommended.
Choice of capacity 2.0kg, 3.5kg & 5.0kg
Wet Chemical type fire extinguishers are used for Class ‘F’ cooking oil and fat fires. The fine spray gives almost immediate flame extinguishment while the wet chemical agent forms a film to seal the surface of the oil and cool it down to prevent re-ignition. It is also suitable for Class ‘A’ wood and paper fires.
Choice of capacity 2.0lt & 7.0lt
Air/Foam type fire extinguishers are ideal for fires involving flammable and combustible liquids such as paper, textiles, wood, petrol, oil, paints, plastics and rubber. This fire extinguisher is not suitable for any type of electrical equipment.
Choice of capacity 9.0lt
Air/Water type fire extinguishers are characterised by their high performance for Class ‘A’ fires, simple method of operation and ideal for tackling freely burning materials such as wood, paper, plastics, textiles, rubber and rubbish. This fire extinguisher is not suitable for Classes ‘B’, ‘E’ or ‘F’ where flammable and combustible liquids, electrical equipment, cooking oil and fats are involved.
Choice of capacity 9.0lt
[+] click on image to enlarge
Clear or Heavy Duty Red
Available in Small & Large to suit 4.5kg, 6.0kg & 9.0kg Fire Extinguishers
Suitable for a 4.5kg Dry Chemical Fire Extinguisher
Complete with break glass, 003 lock and key
High quality powder coated finish
Dimensions: Height 560mm x W280mm x D210mm
Suitable for a 6.0kg & 9.0kg Dry Chemical Fire Extinguisher
Complete with break glass, 003 lock and key
High quality powder coated finish
Dimensions: Height 760mm x W280mm x D230mm
[+] click on image to enlarge
High Quality UV Finish
Manufactured to AS/NZS 1221
Test Pressure: 1700kpa
Flow Rate: 20L/min at 220kpa inlet pressure
Showroom:
8 Parkinson Lane, Kardinya, Western Australia 6163
Ph: +61 (08) 9331 3966 | Fax: +61 (08) 9314 1926 |
hecsfire at bigpond dot com (Email Us)